Logo Search packages:      
Sourcecode: qemu version File versions  Download package

fmopl.h

#ifndef __FMOPL_H_
#define __FMOPL_H_

/* --- select emulation chips --- */
#define BUILD_YM3812 (HAS_YM3812)
//#define BUILD_YM3526 (HAS_YM3526)
//#define BUILD_Y8950  (HAS_Y8950)

/* --- system optimize --- */
/* select bit size of output : 8 or 16 */
#define OPL_OUTPUT_BIT 16

/* compiler dependence */
#ifndef OSD_CPU_H
#define OSD_CPU_H
typedef unsigned char   UINT8;   /* unsigned  8bit */
typedef unsigned short  UINT16;  /* unsigned 16bit */
typedef unsigned int    UINT32;  /* unsigned 32bit */
typedef signed char           INT8;    /* signed  8bit   */
typedef signed short    INT16;   /* signed 16bit   */
typedef signed int            INT32;   /* signed 32bit   */
#endif

#if (OPL_OUTPUT_BIT==16)
typedef INT16 OPLSAMPLE;
#endif
#if (OPL_OUTPUT_BIT==8)
typedef unsigned char  OPLSAMPLE;
#endif


#if BUILD_Y8950
#include "ymdeltat.h"
#endif

typedef void (*OPL_TIMERHANDLER)(int channel,double interval_Sec);
typedef void (*OPL_IRQHANDLER)(int param,int irq);
typedef void (*OPL_UPDATEHANDLER)(int param,int min_interval_us);
typedef void (*OPL_PORTHANDLER_W)(int param,unsigned char data);
typedef unsigned char (*OPL_PORTHANDLER_R)(int param);

/* !!!!! here is private section , do not access there member direct !!!!! */

#define OPL_TYPE_WAVESEL   0x01  /* waveform select    */
#define OPL_TYPE_ADPCM     0x02  /* DELTA-T ADPCM unit */
#define OPL_TYPE_KEYBOARD  0x04  /* keyboard interface */
#define OPL_TYPE_IO        0x08  /* I/O port */

/* Saving is necessary for member of the 'R' mark for suspend/resume */
/* ---------- OPL one of slot  ---------- */
typedef struct fm_opl_slot {
      INT32 TL;         /* total level     :TL << 8            */
      INT32 TLL;        /* adjusted now TL                     */
      UINT8  KSR;       /* key scale rate  :(shift down bit)   */
      INT32 *AR;        /* attack rate     :&AR_TABLE[AR<<2]   */
      INT32 *DR;        /* decay rate      :&DR_TALBE[DR<<2]   */
      INT32 SL;         /* sustin level    :SL_TALBE[SL]       */
      INT32 *RR;        /* release rate    :&DR_TABLE[RR<<2]   */
      UINT8 ksl;        /* keyscale level  :(shift down bits)  */
      UINT8 ksr;        /* key scale rate  :kcode>>KSR         */
      UINT32 mul;       /* multiple        :ML_TABLE[ML]       */
      UINT32 Cnt;       /* frequency count :                   */
      UINT32 Incr;      /* frequency step  :                   */
      /* envelope generator state */
      UINT8 eg_typ;     /* envelope type flag                  */
      UINT8 evm;        /* envelope phase                      */
      INT32 evc;        /* envelope counter                    */
      INT32 eve;        /* envelope counter end point          */
      INT32 evs;        /* envelope counter step               */
      INT32 evsa; /* envelope step for AR :AR[ksr]           */
      INT32 evsd; /* envelope step for DR :DR[ksr]           */
      INT32 evsr; /* envelope step for RR :RR[ksr]           */
      /* LFO */
      UINT8 ams;        /* ams flag                            */
      UINT8 vib;        /* vibrate flag                        */
      /* wave selector */
      INT32 **wavetable;
}OPL_SLOT;

/* ---------- OPL one of channel  ---------- */
typedef struct fm_opl_channel {
      OPL_SLOT SLOT[2];
      UINT8 CON;              /* connection type                     */
      UINT8 FB;               /* feed back       :(shift down bit)   */
      INT32 *connect1;  /* slot1 output pointer                */
      INT32 *connect2;  /* slot2 output pointer                */
      INT32 op1_out[2]; /* slot1 output for selfeedback        */
      /* phase generator state */
      UINT32  block_fnum;     /* block+fnum      :                   */
      UINT8 kcode;            /* key code        : KeyScaleCode      */
      UINT32  fc;             /* Freq. Increment base                */
      UINT32  ksl_base; /* KeyScaleLevel Base step             */
      UINT8 keyon;            /* key on/off flag                     */
} OPL_CH;

/* OPL state */
typedef struct fm_opl_f {
      UINT8 type;             /* chip type                         */
      int clock;              /* master clock  (Hz)                */
      int rate;               /* sampling rate (Hz)                */
      double freqbase;  /* frequency base                    */
      double TimerBase; /* Timer base time (==sampling time) */
      UINT8 address;          /* address register                  */
      UINT8 status;           /* status flag                       */
      UINT8 statusmask; /* status mask                       */
      UINT32 mode;            /* Reg.08 : CSM , notesel,etc.       */
      /* Timer */
      int T[2];               /* timer counter                     */
      UINT8 st[2];            /* timer enable                      */
      /* FM channel slots */
      OPL_CH *P_CH;           /* pointer of CH                     */
      int   max_ch;                 /* maximum channel                   */
      /* Rythm sention */
      UINT8 rythm;            /* Rythm mode , key flag */
#if BUILD_Y8950
      /* Delta-T ADPCM unit (Y8950) */
      YM_DELTAT *deltat;                  /* DELTA-T ADPCM       */
#endif
      /* Keyboard / I/O interface unit (Y8950) */
      UINT8 portDirection;
      UINT8 portLatch;
      OPL_PORTHANDLER_R porthandler_r;
      OPL_PORTHANDLER_W porthandler_w;
      int port_param;
      OPL_PORTHANDLER_R keyboardhandler_r;
      OPL_PORTHANDLER_W keyboardhandler_w;
      int keyboard_param;
      /* time tables */
      INT32 AR_TABLE[75];     /* atttack rate tables */
      INT32 DR_TABLE[75];     /* decay rate tables   */
      UINT32 FN_TABLE[1024];  /* fnumber -> increment counter */
      /* LFO */
      INT32 *ams_table;
      INT32 *vib_table;
      INT32 amsCnt;
      INT32 amsIncr;
      INT32 vibCnt;
      INT32 vibIncr;
      /* wave selector enable flag */
      UINT8 wavesel;
      /* external event callback handler */
      OPL_TIMERHANDLER  TimerHandler;           /* TIMER handler   */
      int TimerParam;                                 /* TIMER parameter */
      OPL_IRQHANDLER    IRQHandler;       /* IRQ handler    */
      int IRQParam;                                   /* IRQ parameter  */
      OPL_UPDATEHANDLER UpdateHandler;    /* stream update handler   */
      int UpdateParam;                          /* stream update parameter */
} FM_OPL;

/* ---------- Generic interface section ---------- */
#define OPL_TYPE_YM3526 (0)
#define OPL_TYPE_YM3812 (OPL_TYPE_WAVESEL)
#define OPL_TYPE_Y8950  (OPL_TYPE_ADPCM|OPL_TYPE_KEYBOARD|OPL_TYPE_IO)

FM_OPL *OPLCreate(int type, int clock, int rate);
void OPLDestroy(FM_OPL *OPL);
void OPLSetTimerHandler(FM_OPL *OPL,OPL_TIMERHANDLER TimerHandler,int channelOffset);
void OPLSetIRQHandler(FM_OPL *OPL,OPL_IRQHANDLER IRQHandler,int param);
void OPLSetUpdateHandler(FM_OPL *OPL,OPL_UPDATEHANDLER UpdateHandler,int param);
/* Y8950 port handlers */
void OPLSetPortHandler(FM_OPL *OPL,OPL_PORTHANDLER_W PortHandler_w,OPL_PORTHANDLER_R PortHandler_r,int param);
void OPLSetKeyboardHandler(FM_OPL *OPL,OPL_PORTHANDLER_W KeyboardHandler_w,OPL_PORTHANDLER_R KeyboardHandler_r,int param);

void OPLResetChip(FM_OPL *OPL);
int OPLWrite(FM_OPL *OPL,int a,int v);
unsigned char OPLRead(FM_OPL *OPL,int a);
int OPLTimerOver(FM_OPL *OPL,int c);

/* YM3626/YM3812 local section */
void YM3812UpdateOne(FM_OPL *OPL, INT16 *buffer, int length);

void Y8950UpdateOne(FM_OPL *OPL, INT16 *buffer, int length);

#endif

Generated by  Doxygen 1.6.0   Back to index